EDC Lite Multi Tool

  • Sale
  • Regular price $69.99
Tax included.



No need for proprietary top caps or threaded your steerer. The EDC Lite is the most compatible multi tool stasher from OneUp. And because extra carriers are available you can easily swap out the multi tool from bike to bike. A 9 function multi tool  that lives in your stem / steerer ready to grab at a moments notice. Don't be the one who never carries tools on a ride. You drive the existing star nut down into your steerer and it attaches to the the star nut for a secure fit.

  • HEX 2, 2.5, 3, 4, 5, 6, 8mm  
  • T25 Torx 
  • Flat Head Screwdriver
  • 75g

ENSURE YOUR FORK IS COMPATIBLE -VERY IMPORTANT

Incompatible forks: Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers

STEERER TUBE INNER DIAMETER

The inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If fitting unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.

STEERER TUBE LENGTH  

Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement.

  • Fox except Fox 38 = 190mm min
  • Fox 38 = 210mm min
  • RockShox Forks  = 210mm min

Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.